Nearly all of the time, companies would spend a lot of money to purchase their forklifts. It is important, therefore to take good care of your machinery to protect your investment into the long run. It is a great idea to know the procedures that are carried out during taking care of and maintaining this machine.
Among the best ways to tell how good the engine is performing is by starting the lift truck up and listening carefully to see how it runs. Like for example, if there are any knocks or misses, the machine is faulty and this must raise some issues. Furthermore listen closely for any squealing sounds that come from the belts because these noises will provide you with a wealth of information.
When performing maintenance, several of the main components you will need to pay attention to include the safety warning devices, horn, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
When the above parts have been inspected thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every cell of the battery needs to be inspected in order to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be replaced regularly. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Inspect the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Then, inspect each and every other part of the machinery including the wheels. If any kind of fault or issue is detected, be certain to deal with it immediately so as to make certain the machine is running at its safest and optimum levels.